If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Molybdenum disulfide (MoS2)
This solid lubricant is considered the “king” of solids.
Molybdenum diulfide, or molybdenum powder, is made from natural concentrates of molybdenum after chemical purification. The color is black, with a slight gray metallic luster. It’s slippery and not soluble in water. Molybdenum diulfide offers the benefits of being non-sticking and dispersible. It can also be added to greases in order to produce a non-sticky, colloidal state. This will increase the lubricity as well as the extreme pressure.
It is suitable for equipment that is subjected to high temperatures, pressures, speeds, and loads. Molybdenum Disulfide has the ability to increase friction and reduce friction when used at low temperatures.
Molybdenum diulfide is used in a variety of ways as a solid lubricant.
1. Lubrication in a wide temperature range: the range of lubricating grease and oil is 60degC up to 350degC. Molybdenum disulfide is a solid lubricant that can be used in the temperature range from 270degC up to 1000degC.
2. Lubrication for heavy loads: The oil films of general lubricating ointments and greases are only capable of bearing relatively small load values. The oil film will rupture once the load is exceeded. The solid lubricating layer can support a load of 108Pa on average.
3. Lubrication for vacuum conditions. Under high vacuum, lubricating greases and oils are very evaporative. They can damage vacuum environments and have a negative impact on other components. Molybdenum diulfide solids lubricating material is used to lubricate.
4. Under radiation, liquid lubricants can lose their lubricating characteristics. Solid lubricants offer better radiation resistance.
5. Lubrication of conductive surface: The friction between conductive surfaces such as motor brush, conductive slides, solar collector rings or sliding electrical contacts of artificial satellites that work in vacuum can be made out of metal, carbon graphite and composite materials.
6. Molybdenum disulfide is suitable for harsh environmental conditions. For example, transportation machinery, engineering equipment, metallurgical or steel industry institutions, mine machinery and other transmission components that are exposed to dust, sand and high temperatures and humidity.
7. Corrosive Environments: Ship machinery, chemical machinery, and transmission parts operating in corrosive mediums such as seawater, water (steam), acid, alkali or salt must be able to withstand different levels of chemical corrosion. Molybdenum Disulfide Solid can be used to lubricate the transmission parts that are working in such a situation.
8. MoS2 can be used to lubricate the transmission parts of electronic, textile, food and medicine machines, as well as printing, paper and paper-making machinery.
9. Some transmission components do not require maintenance. Others need less frequent maintenance. MoS2 solid greases are convenient and economical in these cases.
Tech Co., Ltd. is a professional The powder of molybdenum disulfide With over 12 year experience in chemical product research and development. We accept payment by Credit Card, T/T (West Union), Paypal, West Union or T/T. The goods will be shipped to overseas customers via FedEx or DHL.
You can contact us for high quality molybdenum powder. Contact us Send an inquiry.
Molybdenum diulfide, or molybdenum powder, is made from natural concentrates of molybdenum after chemical purification. The color is black, with a slight gray metallic luster. It’s slippery and not soluble in water. Molybdenum diulfide offers the benefits of being non-sticking and dispersible. It can also be added to greases in order to produce a non-sticky, colloidal state. This will increase the lubricity as well as the extreme pressure.
It is suitable for equipment that is subjected to high temperatures, pressures, speeds, and loads. Molybdenum Disulfide has the ability to increase friction and reduce friction when used at low temperatures.
Molybdenum diulfide is used in a variety of ways as a solid lubricant.
1. Lubrication in a wide temperature range: the range of lubricating grease and oil is 60degC up to 350degC. Molybdenum disulfide is a solid lubricant that can be used in the temperature range from 270degC up to 1000degC.
2. Lubrication for heavy loads: The oil films of general lubricating ointments and greases are only capable of bearing relatively small load values. The oil film will rupture once the load is exceeded. The solid lubricating layer can support a load of 108Pa on average.
3. Lubrication for vacuum conditions. Under high vacuum, lubricating greases and oils are very evaporative. They can damage vacuum environments and have a negative impact on other components. Molybdenum diulfide solids lubricating material is used to lubricate.
4. Under radiation, liquid lubricants can lose their lubricating characteristics. Solid lubricants offer better radiation resistance.
5. Lubrication of conductive surface: The friction between conductive surfaces such as motor brush, conductive slides, solar collector rings or sliding electrical contacts of artificial satellites that work in vacuum can be made out of metal, carbon graphite and composite materials.
6. Molybdenum disulfide is suitable for harsh environmental conditions. For example, transportation machinery, engineering equipment, metallurgical or steel industry institutions, mine machinery and other transmission components that are exposed to dust, sand and high temperatures and humidity.
7. Corrosive Environments: Ship machinery, chemical machinery, and transmission parts operating in corrosive mediums such as seawater, water (steam), acid, alkali or salt must be able to withstand different levels of chemical corrosion. Molybdenum Disulfide Solid can be used to lubricate the transmission parts that are working in such a situation.
8. MoS2 can be used to lubricate the transmission parts of electronic, textile, food and medicine machines, as well as printing, paper and paper-making machinery.
9. Some transmission components do not require maintenance. Others need less frequent maintenance. MoS2 solid greases are convenient and economical in these cases.
Tech Co., Ltd. is a professional The powder of molybdenum disulfide With over 12 year experience in chemical product research and development. We accept payment by Credit Card, T/T (West Union), Paypal, West Union or T/T. The goods will be shipped to overseas customers via FedEx or DHL.
You can contact us for high quality molybdenum powder. Contact us Send an inquiry.